I did the 2.75” as I was worried with the weight of the mega cab that they would settle to less than that. The front does sit about 1/4” high, so looking at maybe shimming the rear, but it’s really only noticeable when parked on an incline/decline.Looks fantastic. Which size Thuren springs are these? I am running Thuren on all four corners, but only have +1" in the front and -.5" rear. Consider going to 2" fronts and back to the factory in the rear. Same size tires and wheel specs - feel like yours looks perfect.
Stock suspension or modified? Any rubbing? This is my next change just can't decide which size.FInally replaced the OEM Trashforce with the new Falken Wildpeak AT4w in 295/65R20.
Also installed the ATS trans Bypass. trans temps went from 170 to 138-145. interesting.
Stock suspension, there is slight rubbing at full lock.Stock suspension or modified? Any rubbing? This is my next change just can't decide which size.
Thanks
Lomax bedcovers are the best for sure. Had one on my last truck.Headed to the parents in Austin TX for a couple days to pick up a generator, everything around where I live "Marietta OK" is sold out after the tornados. Installed my Lomax cover while there and props to mom for the quick eyeball table-saw cut on the tailgate cover so the Lomax would fit flush with the tailgate closed. Came home and installed my Thuren V2 boogie bump stops.
View attachment 72490View attachment 72489View attachment 72488View attachment 72487View attachment 72486
good try mate!Dropped my truck off at the local Dodge dealer for correction of three recalls. Dropped off a box of fresh donuts at check in and asked if it was possible to add the code for remote start. I was told it would be a $250 service fee. I responded to skip that and I would take care of it myself. Dropped the truck off at 0745 and the truck will not be ready till sometime tomorrow. I will not be dropping off another box of donuts when I pick up the truck!
Curious about where you mounted the air compressor for this kit? I'd like to install it inside the cab and away from the elements installing it under the truck which I'm certain will shorten the life of it considerably, especially for me living in the rainy part of the PacNW.Kit Search - Airide Automotive Aftermarket
www.firestoneairide.com
i pretty much know what i did wrong. i was lazy and used cutters to cut the line rather then a good blade. so they are likly squished rather then round. once i get the check valve ill verify each connection. the one that will suck is the one that goes into the bags as my fingers may be too fat to get in there lol. but thats thankfully just 2 bolts to undo per side. its a very slow leak so i can put 10 lbs in and in like 12 hours its down to say 5lbs.
i can fix it but its a monsoon for the next 3 days so ill likly get to it this weekend when its nice out.
It worked with the parts guy! Well actually that was a burrito from my favorite Mexican Restaurant. Any price I find on line for factory parts he matches.good try mate!
It worked with the parts guy! Well actually that was a burrito from my favorite Mexican Restaurant. Any price I find on line for factory parts he matches.
Breakfast tacos would have been the best choiceThe service guy was a rather robust fellow. My choice of donuts seemed appropriate but I have been wrong before ;-)