Ram Heavy Duty Forum
Register a free account today to become a member! Once signed in, you'll be able to participate on this site by adding your own topics and posts, as well as connect with other members through your own private inbox!
2020 Tradesman Center Dash Storage Tray screws
- Thread starter kristof
- Start date
JustMeAndMy3500
New Member
- Joined
- Dec 10, 2023
- Messages
- 18
- Reaction score
- 17
With that tray removed (memory is fading) are there nut plates where the screws would go into, are they exposed and easily removed? If so, take the tray and the nut plates to a REAL hardware store, the one with the unlimited mountain of those pull out drawers full of hardware and a guy that should of retired 165 years ago.
They should be T-20 Torx Screws if you're talking about the upper cubbie that has the 12volt plug in it.
Go to the 4:05 mark of this video
They should be T-20 Torx Screws if you're talking about the upper cubbie that has the 12volt plug in it.
Go to the 4:05 mark of this video
G Mcpherson
Well-Known Member
The Screws in mine are a t -15. I lost one also and they are like a sheet metal type.