What did you do TO your RAM today?

22RAMAlazan · Dec 20, 2021

-Chemical guys 5 year ceramic with polish
-Swing case on passenger installed (do not want to cover tow plugs on driver side)
-Toyo at3 35x12.50x20. No rubbing. Stock height.
-A pic of my ram and my brother in laws power wagon. He has 35x12.50 K02 on stock height for all those who are interested.

kpecks · Dec 20, 2021

22RAMAlazan said:
-Chemical guys 5 year ceramic with polish
-Swing case on passenger installed (do not want to cover tow plugs on driver side)
-Toyo at3 35x12.50x20. No rubbing. Stock height.
-A pic of my ram and my brother in laws power wagon. He has 35x12.50 K02 on stock height for all those who are interested

View attachment 28345

could you post a pic from the front? id love to see how that wheel/tire combo looks w the factory offset. Truck looks great! Did you do the polish/ceramic yourself?

22RAMAlazan · Dec 20, 2021

@kpecks Of course, let me get home and take a decent pic. Front and rear. Check back in tomorrow or late today and I should have it up for reference. And no on the polish/ceramic on my own. I hired a detailer. $800

RichM752 · Dec 20, 2021

Installed my "Not Quite a Color Match" camper shell from my 2016 Ram to the 2021. It works, and I'm not buying a new one for the few months a year I use it.

Christofo · Dec 20, 2021

Passive entry (completed only one side for now) and 15% tint on the front windows. Looks like some mudflaps/splashguards need to be my next mod!

gimmie11s · Dec 20, 2021

Christofo said:
Passive entry (completed only one side for now) and 15% tint on the front windows. Looks like some mudflaps/splashguards need to be my next mod!
View attachment 28381

Free mod:

Flip in those goofy looking mirrors.

Christofo · Dec 20, 2021

gimmie11s said:
Free mod:

Flip in those goofy looking mirrors.

The passenger side mirror is near useless when flipped in. I don't know if they're all like this but it seems to have a lot of magnification and I can't adjust it to where I need it.

CdnHO · Dec 20, 2021

Christofo said:
The passenger side mirror is near useless when flipped in. I don't know if they're all like this but it seems to have a lot of magnification and I can't adjust it to where I need it.

My mirrors are more useful in the tow position. Doesn't matter what people think. An additional benefit is if my mirror clears my dually fenders also clear.

el_barto · Dec 20, 2021

Installed Fox 2.0 IFP shocks on my Power Wagon

gimmie11s · Dec 20, 2021

CdnHO said:
My mirrors are more useful in the tow position. Doesn't matter what people think. An additional benefit is if my mirror clears my dually fenders also clear.

Mine are less useful. I much prefer them folded in and have a better field of view.

gimmie11s · Dec 20, 2021

Christofo said:
The passenger side mirror is near useless when flipped in. I don't know if they're all like this but it seems to have a lot of magnification and I can't adjust it to where I need it.

It was a joke.. drive around however you like. I just hate to see another person fall victim to the Ram tow mirror tribe.

This tow mirror tribe is akin to the hellcat valence tribe who decides to keep the (now pink) lower valence sticker protector on their cars 4 years after taking delivery.

Surf2snow1 · Dec 20, 2021

The Leer HF650M tonneau cover and Bedrug were happy to finally be broken out of their boxes. Wish I did better on the Bedrug install, but it turned out ok. Think I need to mess with the cover a little to make the back sit down a little lower though. The MD stickers, and probably 4x4, will come off tomorrow

CdnHD · Dec 20, 2021

scrambler1000 said:
20” light bar behind lower grille. Some were concerned the the grille would block the light.
My light bar is spilt flood on sides driving light center.

May i ask which bar and mounts you chose? I want to do the same but the RC is huge $$$

DougB · Dec 20, 2021

Installed AMP Research BedStep2, part number 75417-01A, on both sides of the truck. After confirming with AMP that these do fit despite some reviews on Amazon claiming they do not, I went at it today. There was some customization needed to keep them from hitting the plastic trim at the bottom of the bed. I had to slot the holes inward from where their template has you drill. After that, the lever arm no longer touches the trim piece when deployed. The step does not touch the trim either when retracted. Be sure to align them in retracted position before tightening down the bolts. I had one noticeably crooked and had to go back and adjust after the fact. Not hard but just a little hassle.

Passenger side:

Driver side:

Slots after drilling 3/8" hole per template (this is driver's side, passenger is similar except no hoses in the way)

Mustangmike66 · Dec 20, 2021

Linked4door said:
Got the bed step mounted last night. Now I need to figure out if I want to get one for infront of the wheels or not.

Where did you get the step?

Linked4door · Dec 20, 2021

Mustangmike66 said:
Where did you get the step?

I got it from amazon, but its available form most truck acc retailers. Its made by amp research (part# 75324-01a). It is not listed as fitting the 2022's but a few members have installed it. I did not have to trim mine to fit. there was another guy on here that did (see this post).

Bigkeeper · Dec 20, 2021

Surf2snow1 said:
The Leer HF650M tonneau cover and Bedrug were happy to finally be broken out of their boxes. Wish I did better on the Bedrug install, but it turned out ok. Think I need to mess with the cover a little to make the back sit down a little lower though. The MD stickers, and probably 4x4, will come off tomorrow
View attachment 28396
View attachment 28397
View attachment 28398
View attachment 28399

All looks great, Bedrug will relax a bit over time…

Linked4door · Dec 20, 2021

DougB said:
Installed AMP Research BedStep2, part number 75417-01A, on both sides of the truck. After confirming with AMP that these do fit despite some reviews on Amazon claiming they do not, I went at it today. There was some customization needed to keep them from hitting the plastic trim at the bottom of the bed. I had to slot the holes inward from where their template has you drill. After that, the lever arm no longer touches the trim piece when deployed. The step does not touch the trim either when retracted. Be sure to align them in retracted position before tightening down the bolts. I had one noticeably crooked and had to go back and adjust after the fact. Not hard but just a little hassle.

Passenger side:
View attachment 28411 View attachment 28412 View attachment 28415 View attachment 28416

Driver side:
View attachment 28417 View attachment 28418 View attachment 28419 View attachment 28420

Slots after drilling 3/8" hole per template (this is driver's side, passenger is similar except no hoses in the way)
View attachment 28414

that is the next purchase for my DRW. I love my rear bed-step, but defiantly want to add the side ones as well (on at least one side that is).

Surf2snow1 · Dec 20, 2021

Bigkeeper said:
All looks great, Bedrug will relax a bit over time…

Thanks. First one I’ve installed myself. Last two trucks I’ve had the tonneau installer also do the bedrug

DougB · Dec 20, 2021

Linked4door said:
that is the next purchase for my DRW. I love my rear bed-step, but defiantly want to add the side ones as well (on at least one side that is).

Wish they had something for the front so I can check the engine and trans dipsticks. I can just barely shut the hood! lol

Make sure you order the DRW compatible side step model. The one for SRW trucks doesn’t work on DRW.

What did you do TO your RAM today?

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Active Member

Well-Known Member

Well-Known Member

Well-Known Member

Users who are viewing this thread