Smittys2500RAM
Active Member
- Joined
- Jul 14, 2021
- Messages
- 110
- Reaction score
- 75
Lets see the standard....Says right there he got the xl's....I have the standard if you wanna see a pic of those.....
Lets see the standard....Says right there he got the xl's....I have the standard if you wanna see a pic of those.....
Lets see the standard....
Iirc you drill one hole in the factory liner...they bolt right up tho....stupid easy....That's what I'm talking about! That looks clean! How was the bolt up, any drilling needed?
Do your tires rub at all with the rokblokz? I have a similar setup as you and looking for something with no rub. Thanks.Just got my 3.25" ALAS 2.5" Pintop done and decided to get some mudflaps. I'm biased but I like how they look.
RokBlokz - RAM 2500/3500 (5th Gen) 2019+ Mud Flaps XL / Black / Black
View attachment 54618
View attachment 54617
View attachment 54619
Just got my 3.25" ALAS 2.5" Pintop done and decided to get some mudflaps. I'm biased but I like how they look.
RokBlokz - RAM 2500/3500 (5th Gen) 2019+ Mud Flaps XL / Black / Black
View attachment 54618
View attachment 54617
View attachment 54619
Which one are those
The original sizeWhich one are those
any chance you can get I pic on how it looks from inside the front wheel well? I have the Huskies and the tire just touches them at a full turn uncompressed.
View attachment 58419
All, Shortly after i got my truck, 3/22, i purchased the Mopar Ram molded-formed mudgaurds. i do not call them flaps because they are ridgid. Dealer checked my serial # and parts guy said they were bolt on. I got them and picked them up after arrival. It was a few months before i could install because of weather and cold temps so i just figured i would wait for spring to break. Long story short. Put the rear on first with no issues, then went to the front. Removed the wheel per instructions and noticed that the guard just didn`t look quite right. The front guards will not work with the stock running boards. Went back to the dealer, and you can guess the rest of the story. Yes, This is a dealer that the service mgr does not know what SAE stands for so you can imagine the rest of this.
[mod delete]
Take Care Everyone
Thank you, couldn’t decide what I wanted and didn’t want anything rigid, rigid looking and don’t have any AEV parts on my truck to justify having an AEV mudflap. To me that looks weird. Just ordered a set of these. Everything else looked to long or like too much plastic.View attachment 11888View attachment 11889
Ordered the OEM set. Honestly for how cheap these are I don't understand why it wasn't a option when I built the truck. When I built ford's online there was a option for splash guards...
Anyway didn't bother to read all 8 pages but these are the oem ones...dont mind my Jack, he loves opening boxes and presents haha.
Compared to others, these are pretty thick and heavy. Msrp is $65 each set, my cost through work got both for $107 with tax...been raining past 3 days non stop, so haven't installed yet. Will later today.....if you look at the pics there accidently sent me the rears for a truck with flares, the only difference is the recessed area is wider, had I known this I would have ordered the front for flares as well.
Edit : here's the part numbers
Without flares : rear 82215931ab front : 82215930ab
With flares: rear 82215929ab front: 82215928ab
I went with the RekGen Trophy sport. It’s as minimal as I could find. I don’t really like the look of mud flaps but my 35” Nitto RGs we’re gonna throw too much garbage on the rockers. I’ll post some pics in a bit.
Sent from my iPhone using Tapatalk
i know there are a ton of pic's on this thread but if anyone have real time experience with any of the above on a setup like mine and they are working could you send me some pic's from inside the wheel well showing how they look from a mounting stand point and also from the other side showing how long they extend down. I only need pic's of the front.
Thanks in advanced.
Thanks! Look nice. any chance you have a pic of the front with the wheel turned showing the closestRegular size Rok Blokz on same tires, wheels and carli kit. At full turn they do not touch but they do come close. I have not ripped in to one yet. As far as mounting, the three black fasteners are ones you pop out and re-use from the wheel well. The shiny fastener is the one hole you drill. It is trivial. Took less than 45 minutes to install all four.
View attachment 62721
View attachment 62722
View attachment 62725
View attachment 62723
View attachment 62724