I wish someone made a wheel for my truck with the following specs; 18x9" or 20x9" with 40mm positive backspacing, and allow use of oem lug nuts with oem style center cap. Is that too much to ask? The closest thing to that is the AEV 17x8.5" with 27mm positive offset. Or, if Ram wants to be very conservative, give me a 18x8.5 or 20x8.5 with 45mm backspacing, this would at least allow me to run a 35x12.5 and be in spec on wheel width, and would not rub the factory sway bar or radius arms....
To add INSULT to INJURY, AEV makes the exact fitment I want but for a CHEV/GMC 2500 ZR2; 18x9" with the correct offset for the Chev/GMC...
PS. While I am dreaming, I also want that wheel in a fully forged construction for under $750 per wheel. RRW makes all the right stuff for Toyota Tacoma, et al...
https://www.relationsracewheels.com...products/rs6-h-hybrid-17x8-5-monoforged-wheel